Use; Control Panel; Controls - Zanussi FLD 1006 User Manual

Washing machine fld 1006; fld 1206
Table of Contents

Advertisement

Use

Control panel

1 Programme chart
It will help you to choose the most suitable washing
programme for your laundry.
2 Spin speed selector dial
This dial allows you to choose the desired spin
speed or to exclude all the spinning phases by
turning it to position
crease easily. If position
items (programmes A and B), the machine will
perform an extra rinse (4 instead of 3).
The spin speeds on the dial refer to cotton
programmes.
For wool and synthetics the machine will spin at
850 rpm with the dial on position 1000 or 1200.
For delicates the maximum spin speed is 650 rpm
with the dial on position 1000 or 1200.
On position 450 the machine will spin at 350 rpm.
On position 450 the machine will spin at 450 rpm for
cotton, synthetics and wool.
3 Quick wash button
By depressing this button on programmes A and B
for cotton and G and H for synthetics the washing
time will be reduced.
Max. recommended temperature 60°C.
To be used for lightly soiled laundry.
4 Extra rinse button
By depressing this button on programmes A-B for
cotton and linen the machine will perform 4 rinses
instead of 3.
To be used in areas where the water is very soft or
for people allergic to detergents or who have very
delicate skin.
. To be used for items that
is selected for cotton
5 Anti-crease button
Using this option the last rinse water is not emptied
out, so as to avoid creasing if the laundry is not
removed from the machine immediately after
washing.
The water can be emptied out by pressing the button
again (emptying will be followed by a spin) or by
selecting the drain programme "N".
If the button is not pressed, the programmes end
with a spin.
6 On/Off button
Press this button to start the machine. The same
button is used to switch the machine off.
Before selecting a programme or changing an
ongoing programme the machine must be
switched off by depressing the On/Off button.
7 Temperature selector dial
(thermostat)
To select the washing temperature turn the dial to
the required value. Depress the dial to pop it out.
When your laundry is only lightly soiled, a cold wash
can be used (dial to position
8 Mains-on light
It comes on when the machine starts operating and
goes out by depressing ON/OFF button to switch the
machine off.
9 Programme selector dial
To select the required washing programme turn the
dial clockwise. Depress the dial to pop it out.
32
).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents