Operations; Built-In Viewer Operations - JVC VN-H37U Instructions Manual

Operations

Built-in Viewer Operations

The camera has the Built-in Viewer.
Enter the IP address of camera in the address bar of Internet Explorer. The Built-in Viewer allows
H.264/JPEG/MPEG-4 data monitoring and digital PTZ operations.
When you are using the JPEG data compression, you can display a series of still images and record
still images.
Audio can be sent and received via the Built-in Viewer. (This function is only available on VN-H57U/
H257U/H257VPU/H157WPU.)
You can operate PTZ (Pan, Tilt, Zoom) function using a mouse.
● If you click the mouse on the screen, the clicked spot will be the center of the display area.
● You can manipulate zooming by rotating the mouse wheel.
Memo:
● The first time you display the Built-in Viewer in Internet Explorer, the viewer will be installed on the
computer.
Screen Configuration (APage 99)
Picture Quality Setting (APage 101)
PTZ Settings (APage 104)
PTZ Control (APage 106)
Unicast Settings (APage 108)
Multicast Settings (APage 110)
If the display or configuration of the open window appears strange, check the computer
settings as follows:
A
Select [Start] - [Control Panel] - [Appearance and Personalization]
B
Select [Display] - [Adjust screen resolution]
C
Check that [Resolution] is set to [Monitor size (recommended)].
D
Otherwise, change the setting to [Monitor size (recommended)] and press the [OK] button.
E
In [Display Settings], press the [Keep changes] button.
98
On Screen Display Settings (APage 112)
Settings related to Audio Monitor
(APage 118)
Other Setting (APage 120)
Exiting the Built-in Viewer (APage 121)