Table of Contents
Advertisement
Description of the appliance
1.
Upper basket stop
2.
Water hardness switch
3.
Salt container
4.
Detergent dispenser (type A / type B)
5.
Control panel
6.
Rating plate
7.
Rinse aid dispenser (type A / type B)
8.
Filters
9.
Lower spray arm
10. Upper spray arm
11. Upper basket
The control panel
Function push buttons:
programme selected and "half load", the following functions
can also be set with the help of these buttons: water softener
setting, deactivation/activation of the inflow of rinse aid,
deactivation/activation of the audible signals.
Function push button 1
Function push button 2
Function push button 3
"Delay start" push button:
of the programme to be delayed from 1 to 19 hours.
"Half load push button"
economical when only a few dishes need washing.
in addition to the dishwashing
The set of the water softener
Deactivation/reactivation of
the inflow of rinse aid
Deactivation/reactivation of
the audible signals
this option allows the start
: this option is useful and
IN143
The prewash phase is automatically excluded when this option
is selected.
Remember to load both baskets. The corresponding indicator
light will come on when the "half load" option is selected .
With programmes: 1 (Rinse and Hold) - 5 (Crystal) - 6 (Daily
30
I
) the "half load" option can not be selected (push button
deactivated).
The digital display indicates:
- the level of hardness to which the water softener is set
- if the audible signals are activated/deactivated
- if the rinse aid inflow is activated/deactivated
- the delay start
- the approximative remaining time of the running programme
- fault codes concerning malfunction of the dishwasher
23
Advertisement
Table of Contents
