Start The Programme; Select The Degree Of Soil; Select The Desired Options - Zanussi FJE 1207 User Manual

7. Select the spin speed or the
RINSE HOLD option
Press the SPIN SPEED button
order to select the desired spin speed or the RINSE
HOLD option . The relevant light will light up.
If you select the RINSE HOLD option, the machine
will stop at the end of the programme with the water
still in the tub.

8. Select the degree of soil

According to the degree of soil of your laundry,
select position or
up.

9. Select the desired options

If your laundry is very dirty or has stubborn stains, it
may be advisable to select the PREWASH
and/or BIO option.
Press the OPTIONS button so as to cause one or
both of the lights to light up.
repeatedly, in
. The relevant light will light

10. Start the programme

Press the START/PAUSE button. The relevant light
will stop flashing, the DOOR LOCKED light will light
up, and only the light relevant to the phase that is in
progress will remain lit.
11. How to change a programme
during its cycle
Before you make any change, you must pause the
washing machine by pressing the START/PAUSE
button.
It is possible to change any phase before the
programme carries it out.
Changing the type of fabric or temperature is
possible, obviously, only during the washing phase.
When you make a change in these two parameters,
the washing machine will resume the cycle from the
beginning.
If it is necessary to drain the water in order to change
the programme in progress, proceed as follows:
• PAUSE the machine by pressing the
START/PAUSE button;
• press the RESET button repeatedly, until
only the DRAIN light
• press the START/PAUSE button again.
When the water has been drained you may select a
new programme and press the START/PAUSE
button to start it.
12. How to cancel a programme
during its cycle
To cancel a programme that is being carried out, first
pause the washing machine by pressing the
START/PAUSE button, then press the RESET
button repeatedly, until all lights go out.
17
remains lit;