Panel Indicator Lights; Numeric Pager - GE Security Pro 1000 User Manual

Security Pro 1000
Alarm Siren and X10 Light Information
X10 Lights
X10 Siren
Interior & Panel Siren
Exterior Siren

Panel Indicator Lights

Use the following table to understand the panel indicator lights.
Button
Arm Doors & Windows
Arm Motion Sensors
Disarm
System Status
Chime Doors
Chime Special Motion
Time Lights
Sensor Lights

Numeric Pager

You may program your security system to send a numeric message indicating system
activities to your pager. The system will send the message twice. See "Programming
Instructions".
Use the following table to determine what the numeric message is reporting.
Reports Numeric Message
Phone Test -101 -101
AC Power Restore -102 -102
AC Power Failure -103 -103
Latchkey -104 -104
No Activity -105 -105
Emergency -107 -107
Fire Intrusion
Steady Flashing
Steady Steady
Temporal 3 Steady
Temporal 3 Steady
Panel Indicator Lights
When the Button Light is
On
Doors/Windows armed
Motion Sensors armed
System disarmed
System trouble or Open Sen-
sor
Door will cause chime
Motion will cause chime
Time activated lights on
Sensor activated lights on
Numeric Pager Reporting
Reports
Intrusion
Fire
Disarming
Arming
Fail to Open
Fail to Close
Emergency
Steady
Alarm beeps
Fast on/off
When the Button
Flashes
Doors/Windows armed
& No Entry Delay on
Motion Sensors armed
& Latchkey on
System subdisarmed
System in alarm
_________________
_________________
_________________
_________________
Numeric Message
-108 -108
-109 -109
-110 -110
-111 -111
-112 -112
-113 -113
9