Using the Cradle-type Battery Charger (HA-G30CHG)
The optionally available Cradle-type Battery Charger (HA-G30CHG) lets you charge
the Handheld Terminal's battery simply by placing the Handheld Terminal onto the
charger.
General Guide
Top
Front
3
4
1
AC Adaptor Jack
2
Terminal Detect
Switch
3
Power Contacts
4
Power LED
2
Back
Connect the AC adaptor (sold separately) here.
This switch detects when the DT-X30 is mounted correctly on the
charger.
Power is supplied to the DT-X30 via these contacts.
This LED indicates the power status and the mountting status of
the DT-X30.
Off: DT-X30 is not installed
Green: Power on, DT-X30 mounted correctly
1
E-43