Adjusting The Brilliance Of A Tone; Adding Reverb To The Tone - Casio PX-350M User Manual

Using Built-in Tones
Adjusting the Brilliance of a
Tone
1.
Press the cs (FUNCTION) button.
The FUNCTION lamp will light and the function screen
will appear on the display.
Lit
2.
do
Use the (i) and
the Tmpr/Effect screen.
3.
dp
Press the (ENTER) button.
This will display a screen for selecting settings in the
Tmpr/Effect group.
4.
Use the do (i) or
the brilliance screen shown below.
5.
(w, q) buttons to adjust the
ct
Use the
brilliance of the currently selected tone. You
can adjust brilliance in the range of –3 to 0 to 3.
w : Mellower and softer
q : Brighter and harder
6.
cs
Press the (FUNCTION) button.
This will exit the brilliance screen and cause the
FUNCTION lamp to go out.
NOTE
• See "Other Settings" (page E-43) for details about
using the cs (FUNCTION) button.
E-12
dn
(u) buttons to select
dn (u) button to select

Adding Reverb to the Tone

1.
While holding down the
button, press the
This will display a reverb type selection screen.
2.
(w, q) buttons to select the
Use the ct
reverb type you want.
• The following shows the five available reverb type
settings.
0: OFF (no reverb)
1: Room
2: Hall
3: Large Hall
4: Stadium
3.
Press the cs (FUNCTION) button.
This exits the reverb type selection screen.
cs (FUNCTION)
dk (REVERB) button.