Table of Contents
Advertisement
1
RS-232C Interface
2
RS-485 Interface
3
AC adaptor jack
4
Nose Guide
5
Data Collector detection switch Detects whether or not the Data Collector is mounted correctly on
6
Data communication indicator
7
Power indicator
8
Installation covers (L, R)
9
Charge/Power supply terminal
10 Infrared port
11 Power switch
12 Base
13 DIP switches
14 Wall mounting hole
For connection of a PC and uploading/downloading of system data
and file data.
For connection of multiple optional Basic Cradles.
For connection of an AC adaptor to supply power.
Remove this guide when you are using the down-facing reader
port model.
the Basic Cradle.
Indicates the status of data communication operations.
Off:
Not communicating
Flashing Green:
Communication in progress
Indicate whether power is ON or OFF, and if the Data Collector is
mounted.
Off:
Power OFF
Lit Red:
Power ON, Data Collector not mounted
Lit Green: Power ON, Data Collector mounted
Hold down the charge/power supply terminals when the Basic
Cradle is used as an installed type.
Supplies power to the Data Collector mounted on the Basic
Cradle.
This port provides contact-less infrared communication capability
with the Data Collector.
Turns power ON and OFF.
Reverse the position of the base when wall-mounting the Basic
Cradle.
Use these switches to set the operational configuration of the
Basic Cradle.
Use this hole to attach the Basic Cradle to a hook on a wall.
E-33
Hide quick links:
Advertisement
Table of Contents
