20-230.fm Page 20 Friday, March 24, 2000 9:07 AM
Using Mode
lets you change the receiver's
MODE
settings.
To set a FM 100 kHz tuning step ,
tune to a FM station, then press
0.1 MHz
.
MODE 1 0
briefly to confirm the setting.
To set a FM 200 kHz tuning step ,
0.2 MHz
press
.
MODE 1 1
pears briefly to confirm the setting.
To set a 9kHz AM tuning increment ,
tune to an AM station then press
9 kHz
.
appears briefly
MODE 2 0
to confirm the setting.
To set a 10kHz AM tuning increment ,
press
.
MODE 2 1
pears briefly to confirm the setting.
To set a 12-hour clock format , press
12 Hr
.
appears brief-
MODE 3 0
ly to confirm the setting.
To set a 24-hour clock format , press
24 Hr
.
appears briefly
MODE 3 1
to confirm the setting.
To turn off the beep tone , press
OFF
.
appears briefly
MODE 4 0
to confirm the setting.
To turn on the beep tone , press
. The receiver beeps
MODE 4 1
bEEP
once and
appears briefly to
confirm the setting.
To rearrange manually stored FM fre-
quencies in memory locations 1–9 ,
20
press
MODE 5 0
ders the frequencies from the lowest
to the highest.
Note: Frequencies stored in the AM
or LW bands cannot be rearranged
using
MODE
appears
Using the NORM/NEWS/
MUSIC Switch
ap-
You can enhance the sound of the
different types of programs you hear
through the receiver.
To enhance the high tones heard in
music programs, slide the switch to
MUSIC
heard in vocal programs, slide the
switch to
10 kHz
ap-
programming, slide the switch to
.
NORM
Using the Display Backlight
To turn on the display backlight, press
. To save battery power, the light
automatically turns off about 7 sec-
onds after you release
Locking the Controls
The lock control prevents you from
accidentally turning the receiver on or
off, selecting the front-panel controls,
or changing the band or frequency.
To lock all of the front panel controls,
and
TUNING/
appears.
Special Features
. The receiver or-
.
; to enhance the low tones
. To listen to normal
NEWS
.
, slide
/
to
.