Advertisement
• Unplug the AC adapters from the AC outlet before
unplugging it from the transmitter or receiver.
• Use the supplied AC adapters only. Using an AC
adapter not designed for this product may cause
damage.
• For more operations for the A/V signal receiver, refer
to the user's guide of the A/V signal sender.
Specifications
Power Supply.................... . .........................12 V DC/250 mA
Weight ...............................................................6.5 oz (180g)
Dimensions................................. . ...........................................
..................... 4.3 × 4.2 × 1.6 Inch (11 × 10.7 × 4 cm) (HWD)
Output Level.............. ............................................................
............................. 1 ± 0.2 Vpp (Audio), 1 ± 0.2 Vpp (Video)
S-Video Output Level......................... . ..................................
...................................Y: 1 Vpp ± 0.2 Vpp, C: 228 mV ± 20%
Specifications are subject to change and improvement without notice. Actual
product may vary from the images found in this document.
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult your local RadioShack store or an experienced radio/TV technician for help.
If you cannot eliminate the interference, the FCC requires that you stop using your equipment.
Changes or modifications not expressly approved by RadioShack may cause interference and void
the user's authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
5
Advertisement
