Call Waiting; Direct Station Selection Buttons (Hotline) - Toshiba Strata CTX DKT2104-CT User Manual

Call Waiting

Call Waiting places an incoming call in queue and alerts you with a warning tone. The
[DN] or Line LED flashes at the on-hold rate.
1. If you are talking, press
...or the flashing [DN]. The call you are on is placed on hold and you are connected
to the waiting call. The [DN] or Line LED lights steady.
...or
Administrator to find out if you have Auto Hold.
...or the ringing [DN] or
you to the transferred call. The [DN] or Line LED remains steady.
...or
telephone and the Line LED flashes at the incoming call rate.
2. Press a [DN], then
...or

Direct Station Selection Buttons (Hotline)

This optional feature enables you to use a
station's line extension. The DSS LED shows the status (idle/busy) of the station and/
or the station's primary extension. For example, a station's DSS button LED shows
busy (light steady red) when the station is:
busy on a call on any button
•
idle but all appearances of the station's extension are in use by other stations.
•
When the station is in DND, the LED flashes red.
To connect directly to another station's extension
1. When connected to a line or another station, press
The original party is put on-hold. You can call a station even if the DSS LED
shows busy (steady red).
2. Announce the call...or transfer the call by hanging up or pressing
You can transfer the call to an idle or busy station.
Note
Strata DKT2104-CT Cordless Digital Telephone 01/02
if your telephone has the Auto Hold feature. See your System
. The existing call is disconnected. The camped-on line rings your
again.
.This disconnects the current call and then connects
button to connect directly to another
Call Waiting
.
.
Features
39