Replacing The Fuses - Yamaha FX WaveRunner 2007 Owner's/Operator's Manual

Table of Contents

Advertisement

Trouble recovery
gine. Any wrong connection could dam-
age the electrical system.
(4) Start the engine, and then disconnect the
jumper cables by reversing the steps
above.
ECJ00690
CAUTION:
Never push the start switch while the en-
G
gine is running.
Do not operate the start switch for more
G
than 5 seconds, otherwise the battery
will be discharged and the engine will
not start. Also, the starter motor could
be damaged. If the engine does not start
in 5 seconds, release the start switch,
wait 15 seconds, and then try again.
EJU34680

Replacing the fuses

The fuses are located in the electrical box.
To replace a fuse:
(1) Remove the cap on the electrical box.
93
(2) Replace the blown fuse with the spare
fuse of the correct amperage by using the
fuse puller on the reverse side of the cap.
1 Electrical box
2 Cap
3 Fuse
4 Spare fuse
1 Fuse puller
Fuse amperage:
Main fuse:
20 A
Meter fuse:
3 A
Bilge pump fuse:
3 A
EWJ00800
WARNING
Do not use fuses of higher amperage than
recommended. Substitution with a fuse
that has an improper rating can cause ex-

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2007 waverunner fx cruiser

Table of Contents