(1) Connect the positive (+) jumper cable to
the positive (+) battery terminals of both
batteries.
(2) Connect one end of the negative (–)
jumper cable to the negative (–) battery
terminal of the booster battery.
(3) Connect the other end of the negative (–)
jumper cable to an engine hanger.
3
4
1 Positive (+) jumper cable
2 Booster battery
3 Negative (–) jumper cable
4 Engine hanger
(4) Start the engine, and then disconnect the
jumper cables by reversing the steps
above. (See page 28 for information on
starting the engine.)
EJU43880
Replacing the fuses
If a fuse is blown, replace it with the proper
fuse.
1
2
1
1 Good fuse
2 Blown fuse
1
1 Good fuse
2 Blown fuse
To replace a fuse:
(1) Remove the seats. (See page 44 for seat
Trouble recovery
removal and installation procedures.)
2
2
97