YXP1000
1. Locknut
Tightening torque:
17 N·m (1.7 m·kgf, 12 ft·lbf)
WARNING
Do not overtighten the adjusting nut or
locknut. The self adjusters may not oper-
ate properly, reducing braking perfor-
mance.
2. Adjusting nut
Replacing a headlight bulb
If a headlight bulb burns out, replace it as fol-
lows.
1. Remove the headlight bulb holder by
turning it counterclockwise.
1. Headlight bulb holder
2. Remove the defective bulb by unhooking
the headlight bulb holder tabs.
8-22