Yamaha KODIAK 400 Owner's Manual page 120

1. Bolt (× 2) (under fenders)
3. Remove the quick fastener screws, and
then pull the panel upward to remove.
1. Quick fastener screw (× 2) 2. Panel C
To install
1. Place the panel in the original position,
and then install the quick fastener
screws.
2. Place the carrier in the original position,
and then install the carrier bolts under the
fenders.
3. Install the top carrier bolts, and then tight-
en all bolts to the specified torques.
Tightening torque:
Carrier bolt (top):
34 Nm (3.4 m·kgf, 25 ft·lbf)
Carrier bolt (under fenders):
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
8-10