9. Fill the engine with sufficient oil to reach
the specified level. Install the dipstick and
tighten it.
Recommended oil:
See page 10-2.
Oil quantity:
Total amount:
2.6 L (2.3 Imp qt, 2.7 US qt)
Periodic oil change:
2.3 L (2.0 Imp qt, 2.4 US qt)
With oil filter replacement:
2.4 L (2.1 Imp qt, 2.5 US qt)
CAUTION:
_
Do not put in any chemical additives.
G
Engine oil also lubricates the clutch
and additives could cause clutch slip-
page.
G
Be sure no foreign material enters the
crankcase.
_
10. Start the engine and warm it up for seve-
ral minutes. While warming up, check for
oil leakage. If oil leakage is found, stop
the engine immediately and check for the
cause.
11. Install the panels.
EBU00825
Final gear oil
Final gear oil measurement
1. Place the machine on a level place.
2. Remove the oil filler bolt and check the oil
level. It should be up to the brim of the
hole. If the level is low, add oil to raise it to
the proper level.
8-15