Electrolux ZDC 67550W User Manual page 10

125987350.qxp 2007-01-09
10 electrolux use
Press this button to start the dryer after
having selected the programme and
the options.
The relevant light will stop flashing.
If the programme selector dial is turned
to another position, when the machine is
running, the buzzer will sound and the
programme phase indicator lights will flash.
The drum turns alternately in both direc-
tions during drying.
All drying programmes end with a 10 minute
cooling phase (light Cooling is on).
You may remove the laundry after this
phase.
The lights End/Anticrease, Filtre and
Empty Tank illuminate and the buzzer
sounds
If the door of the appliance or the small
door at the bottom is opened while the
programme is running, this button must
be pressed again after closing the door
in order to restart the programme from
the point at which it was interrupted.
This button must be depressed also
after a power failure and after having re-
inserted the water reservoir, if it has
been emptied in the middle of a pro-
gramme after lighting up of light Empty
Tank .
In both cases the light of the Start/Pause
button flashes to remind you that the
start button needs to be pressed again.
Select the Delay Start
his button allows you to delay the starting of
T
the programme by 3, 6 or 9 hours.
Press the button until the light relevant
to the desired delay lights up. This
option must be selected
15:02 Page 10
selected the programme and
pressing START/PAUSE to start the
programme.
The machine begins the countdown,
which is shown by the pilot lights. For
example, if you have chosen a 9-hour
delay (pilot light 9h lit), after 3 hours, 9h
goes out and 6h lights up; after 3 more
hours, 6h goes out and 3h lights up.
When the 9 hours are over (pilot light 3h
off), the drying cycle begins.During the
delayed start period, it is not possible to
change the programme or the selected
delay. If you wish to do so, you must first
cancel everything by rotating the pro-
gramme selector dial to position "
Select the new programme, the options
and the delayed start, then press
START/PAUSE. If you wish to change
only the options, this can be done on
condition that the new option(s) is(are)
compatible with the programme. Set the
machine to PAUSE by depressing the rel-
evant button, select the new option(s) and
depress START/PAUSE button again.
If you wish to add some laundry while the
machine is performing the countdown, after
having done so and having closed the door,
press START/PAUSE again, in order to allow
the machine to complete the remaining
countdown time.
Indicator lights
TThese lights indicate the following
functions:
Drying
"
This light indicates that the appliance is
in the drying phase
"Cooling" light
This light indicates that the appliance is in the
cooling phase. At the end of drying, there is
after
a 10 minute cooling phase to cool the
having
light
"
.
before
Off
".