Yamaha BREEZE YFA1S Owner's Manual page 101

4. Remove the dipstick and drain bolt to drain
the oil.
q
r
1. Drain bolt
3. Compression spring
cC
When removing the drain bolt, the compres-
sion spring, oil strainer and O-ring will fall
out. Take care not to lose these parts.
q
e w
2. O-ring
4. Oil strainer
5. Clean the oil strainer with solvent.
6. Inspect the O-ring and replace it if damaged.
7. Install the O-ring, oil strainer, compression
spring and drain bolt. Tighten the drain bolt to
specification.
cC
Before installing the drain bolt, be sure to
install the O-ring, compression spring and
oil strainer.
Tightening torque:
Drain bolt (engine):
32 Nm (3.2 m0kgf, 23 ft0lbf)
8-6