Engine Oil - Yamaha BEARTRACKER YFM250XP Owner's Manual

EBU00866

Engine oil

Engine oil level measurement
1. Place the machine on a level place.
2. Warm up the engine for several minutes
and stop it. Wait at least ten minutes for
the oil to drain back into the crankcase
before checking the oil level.
NOTE:
_
Be sure to wait at least ten minutes until the oil
level settles before checking.
_
3. Remove the dipstick and wipe it off with a
clean rag. Insert the dipstick in the filler
hole without screwing it in.
4. Remove the dipstick and inspect the oil
level.
5. The oil level should be between the max-
imum and minimum marks. If the level is
low, add oil to raise it to the proper level.
CAUTION:
_
Make sure no foreign material enters the
crankcase.
_
1. Dipstick
3. Minimum level mark
8-5
2. Maximum level mark