Grease Points - Yamaha AR230 Owner's/Operator's Manual

*AR230(SRT1000)-'04-OwnMnl 11/10/03 11:27 AM Page 4-8
4
M & C
AINTENANCE ARE

GREASE POINTS

To keep moving parts sliding or rotating
smoothly, coat them with water resis-
tant grease such as Yamaha Marine
Grease, Yamaha Grease A, or an equiv-
alent.
Throttle Cable
Grease the throttle-cable inner wires at
the carburetors.
Steering Cable Ball Joints and Inner
Wire
Grease the steering cable and shift
cables ball joints at the steering noz-
zles. Extend the steering cable and
shift cable inner wires and apply a thin
coat of grease to them.
Pivot Points
Grease all pivot points of the steering
and shift mechanism at the pump end.
4-8
M
AINTENANCE
Bearing Housing
➀
Bearing housing grease nipple
Grease the bearing housing through
the grease nipple.
Recommended water-resistant
grease:
Yamaha Marine Grease, or
Yamaha Grease A
The first service should be done after
10 hours or 1 month by your Yamaha
dealer.
1 Fill the bearing housing with water-
resistant grease through the grease
nipple.
Grease capacity: 33.0~35.0 cc
(1.11~1.18 oz)
After first service: Every 100 hours or 6
months (you may do this yourself).
Grease capacity: 6.0~8.0 cc
(0.20~0.27 oz)
CAUTION:
Fill the grease slowly and carefully,
because it can damage the hose and
the joints.
4-9
4
& C
ARE