Yamaha WOLVERINE YFM350FXS Owner's Manual page 132

1. Caliper adjusting bolt locknut
2. Caliper adjusting bolt
a. Cable length
5. Turn in the rear caliper adjusting bolt by
hand until it feels tight. Then turn it out
1/8 turn and tighten the locknut to the
specified torque.
Tightening torque:
Caliper adjusting bolt locknut:
15 Nm (1.5 m·kgf, 11 ft·lbf)
CAUTION:
When tightening the locknut, hold the ad-
justing bolt with a wrench so that the ad-
justing bolt does not turn together with the
locknut.
6. Turn the parking brake cable adjusting
bolt so that there is no free play in the ca-
ble. Then tighten the parking brake cable
locknut.
8-27