Yamaha WOLVERINE YFM350FXR Owner's Manual page 114

6. Clean the oil strainer and oil filter element
with solvent.
7. Check the O-ring for damage and re-
place it if necessary.
8. Install the oil filter element, and O-ring.
1. O-ring
9. Install the oil filter cover by installing the
bolts.
10. Install the oil strainer, compression
spring, O-ring and drain bolt. Tighten the
drain bolt and oil filter cover bolts to the
specified torques.
CAUTION:
Before installing the drain bolt, be sure to
install the O-ring, compression spring and
oil strainer.
Tightening torques:
Drain bolt (engine):
32 Nm (3.2 m·kgf, 23 ft·lbf)
Filter cover bolt:
8 Nm (0.8 m·kgf, 6.0 ft·lbf)
11. Fill the engine with oil, and then install the
engine oil filler cap.
8-7