Yamaha 40C Owner's Manual page 67

4) Just prior to turning off the engine,
quickly
Engine Fogging Oil" (Part No. LUB-
STRRT-12-00) alternately into each
carburetor. When properly done, the
engine will smoke excessively and
almost stall.
8 Flushing with the flushing attachment
1) Remove the top cowling and silencer
cover. Remove the propeller.
2) Install a flushing attachment to the
lower
available from your Yamaha dealer).
cC
Avoid running the outboard at high
speed while on the flushing attachment,
or overheating could occur.
605014
w
8 Do not touch or remove electrical parts
when starting or during operation.
8 Keep hands, hair and clothes away
from flywheel and other rotating parts
while engine is running.
3) Run the engine at a fast idle for 10~15
minutes.
4) Just prior to turning off the engine,
quickly
Engine Fogging Oil" (Part No. LUB-
STRRT-12-00) alternately into each
carburetor. When properly done, the
engine will smoke excessively and
almost stall.
5) Remove the flushing attachment and
wipe off any excess water.
6) Install the silencer cover and top
cowling. Install the propeller.
4-6
spray "Yamaha
unit. (Flushing attachment
spray "Yamaha
E
Stor-Rite
Stor-Rite