WARNING
POTENTIAL HAZARD
The headlight bulb is hot when it is on
and immediately after it is turned off.
WHAT CAN HAPPEN
You can be burned, or a fire could start
if the bulb touches something flamma-
ble.
HOW TO AVOID THE HAZARD
Wait for the bulb to cool before touching
or removing it.
3. Put a new bulb into position and secure it
in place with the bulb holder.
4. Install the bulb holder cover.
CAUTION:
Make sure the bulb holder cover is secure-
ly fitted over the bulb holder and seated
against the reflector.
5. Install the headlight unit assembly.
Adjust the headlight beam if necessary.
EBU00409
Headlight beam adjustment
CAUTION:
It is advisable to have a Yamaha dealer
make this adjustment.
1. Vertical adjustment:
To raise the beam, turn the adjusting
screw clockwise.
To lower the beam, turn the screw coun-
terclockwise.
1. Adjusting screw (× 2)
8-38