Save - Samsung STC-14 User Manual

Operating the Camera
POLARITY :
...
Use this option to set the black/white properties of images.
When "BW" is selected, high temperature areas will be
shown in white, while low temperature areas will be
displayed in black. If "WB" is chosen, black and white will
be displayed in the opposite way as BW. Press the LEFT
button or RIGHT button while the cursor is aligned with "4.
POLARITY" to switch the black/white inversion setting from: BW ⇒ WB ⇒ BW. Select "5.
RETURN" to confirm the current setting and go back to the MAIN SETUP menu screen.
(Default value: BW)
- TH Lo : Set the L Range threshold.
- TH Hi : S et the H Range threshold. RETURN Confirm the current setting and go back to the
IMAGE ADJ sub menu screen.
SPECIAL (environment settings mode)
Use this menu to adjust environment settings items related to areas such as screen display, video
output, and communications. Press the SET button while the cursor is aligned with "7.SPECIAL" to
display the following sub menu.
MAIN SETUP
1. BRIGHTNESS
2. CONTRAST
3. RANGE
4. NUC
5. NUC MOOE
6. IMAGE ADJ
7. SPECIAL

8. SAVE

... TV SYSTEM (video output setting) :
U se this option to adjust the video output setting.
P ress the LEFT button or RIGHT button while the cursor is
aligned with "1. TV SYSTEM" to switch the TV SYSTEM
setting from: NTSC ⇒ PAL ⇒ NTSC. Select "5. RETURN"
to confirm the current setting and go back to the MAIN
SETUP menu screen. (Default value: NTSC)
24
Security IR Camera
IMAGE ADJ
1.3D-DNR OFF
2.SHARPNESS OFF
3.D-ZOOM X2
▶ 4.POLARITY
BW
5.RETURN
AUTO
MANUAL
AUTO
INTERVAL
SPECLAL SETUP
▶ 1.TV SYCTEM NTSC
2.LANGUAGE ENGLISH
3.COMM ADJ
4.RESET
5.RETURN
User's Manual
... COMM ADJ (communication settings mode) :
U se this menu to adjust communication settings.
P ress the SET button while the cursor is aligned with "3.
COMM ADJ" in the SPECIAL SETUP menu to display the
following sub menu.
... CAMERA ID (camera ID settings) :
Use this option to adjust CAMERA ID settings.
P ress the LEFT button or RIGHT button while the cursor is aligned with "1. CAMERA ID" to
adjust the CAMERA ID setting to a value from 0-255. The adjusted value will become valid
when the setting is saved. Select "6. RETURN" to go back to the SPECIAL SETUP menu
screen. (Default value: 0)
... BAUD RATE (communications speed settings mode) :
U se this option to change the BAUD RATE to one of four settings: 38,400 bps, 19,200 bps,
9600 bps, 4800 bps. Press the LEFT button or RIGHT button while the cursor is aligned with
"2. BAUD RATE" to switch the BAUD RATE setting from: 4800 ⇒ 9600 ⇒ 19,200 ⇒ 38,400
⇒ 4800. Select "6. RETURN" to confirm the current setting and go back to the SPECIAL
SETUP menu screen. (Default value: 9600 bps)
... UART MODE (parity settings mode) :
U se this option to adjust parity settings.
P ress the LEFT button or RIGHT button while the cursor is aligned with "3. UART MODE" to
switch the UART MODE setting from: 8-E-1 ⇒ 8-O-1 ⇒ 8-N-1 ⇒ 8-E-1. Please note that
both the bit length (8) and the stop bit (1) are fixed. Select "6. RETURN" to confirm the current
setting and go back to the SPECIAL SETUP menu screen. (Default value: 8-E-1)
RET PKT (return packet setting) :
...
U se this option to adjust the return packet (returned using the same status as the data
entered) setting.
P ress the LEFT button or RIGHT button while the cursor is aligned with "4. RET PKT" to switch
the RET PKT setting from: ON ⇒ OFF ⇒ ON. Select "6. RETURN" to confirm the current
setting and go back to the SPECIAL SETUP menu screen. (Default value: ON)
... Camera ID(ID display setting) :
U se this option to adjust the display setting of the currently set Camera ID (appears on the top
left of the screen).
Security IR Camera
COMM ADJ
1.CAMERA ID 1
▶ 2.BOUDRATE 4800
3.URAT MODE 8-E-1
4.RET PKT ON
5.DISPLAY CAM ID OFF
6.RETURN
25
User's Manual