Adjusting The Clutch Free Play; Adjusting The Brake Lever Free Play - Yamaha TT-R 110 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR

Adjusting the clutch free play

The clutch free play must be checked
and, if necessary, adjusted as follows
at the intervals specified in the periodic
maintenance and lubrication chart.
1. Loosen the locknut.
2. Slowly turn the clutch adjusting
screw in direction (a) until resis-
tance is felt, and then turn it 1/8
turn in direction (b).
(b)
6
1
1. Locknut
2. Clutch adjusting screw
NOTE:
Turning the clutch adjusting screw in di-
rection (a) decreases clutch free play
and turning it in direction (b) increases
clutch free play.
EAU44661 3. Tighten the locknut to the specified
torque.
Tightening torque:
Locknut:
8.0 Nm (0.8 m·kgf, 5.8 ft·lbf)
NOTE:
When tightening the locknut, hold the
clutch adjusting screw with a screwdriv-
er so that it does not turn together with
the locknut.
(a)
2
Adjusting the brake lever free
play
1. Brake lever free play adjusting bolt
2. Locknut
3. Brake lever free play
The brake lever free play should mea-
sure 10.0–20.0 mm (0.39–0.79 in) as
shown. Periodically check the brake le-
ver free play and, if necessary, adjust it
as follows.
1. Loosen the locknut at the brake le-
2. To increase the brake lever free
6-17
2
1
(b)
(a)
ver.
play, turn the adjusting bolt in di-
rection (a). To decrease the brake
lever free play, turn the adjusting
bolt in direction (b).
EAU44880
3