1
Br
L/W
2
3
L/W
4
L/Y
ELECTRIC STARTING SYSTEM
CHECKING THE STARTER RELAY
• Disconnect the starter relay from the cou-
pler.
• Connect the pocket tester (
tery (12 V) to the starter relay coupler as
shown.
Battery positive terminal
Battery negative terminal
Tester positive probe
Tester negative probe
• Does the starter relay have continuity
between red and black?
Yes
No
CHECKING THE DIODES
• Remove the diodes from the couplers.
• Connect the pocket tester (
diode as show.
• Check the diodes for continuity.
Tester positive probe
Tester negative probe
Tester positive probe
Tester negative probe
Tester positive probe
Tester negative probe
Tester positive probe
Tester negative probe
NOTE:
When you switch the tester's positive and
negative probes, the readings in the above
chart will be reversed.
• Are the tester readings correct?
Yes
No
8 - 15
ELEC
red 3
Good.
Replace.
brown 1
blue/white 2
blue/white 3
blue/yellow 4
blue/white 2
brown 1
blue/yellow 4
blue/white 3
Good.
Replace the defective diode(-s).
–
+
1) and bat-
brown 1
blue/white 2
black 4
1) to the
Continu-
ity
No conti-
nuity