Yamaha VK540EK Owner's Manual page 53

NOTE:
@
Apply the parking brake before replacing the V-belt.
@
1. Remove the drive guard.
2. Rotate the secondary sliding sheave clockwise 1
and push 2 it so that it separates from the secondary
fixed sheave.
3. Pull 3 the V-belt up over the secondary fixed sheave.
4. Remove the V-belt from the secondary sheave
assembly and primary sheave assembly.
5. Install the new V-belt over the primary sheave assem-
bly.
6. Rotate the secondary sliding sheave clockwise 4
and push 5 it so that it separates from the secondary
fixed sheave.
7. Install the V-belt 6 between the secondary sliding
and secondary fixed sheaves.
8. Install the drive guard.
WARNING
@
Never run the engine with the V-belt or drive guard
removed.
@
8-12