Recording Check - Sanyo TLS-9024P Instruction Manual

NORMAL RECORDING

Recording Check

The image being recorded can be checked.
1
During recording, press the PLAY (REC CHECK)
button.
ø The tape will be rewound and then played
back. The VCR will then return to the previous
recording mode.
NOTE:
œ During recording check operations, recording is
suspended momentarily.
Clog Detection
This VCR is equipped with a clog detection function.
The recording quality is monitored automatically. When
the heads are dirty and the recording quality
deteriorates, the output at the WARNING OUT terminal
becomes 0V (Low), the "m" indicator flashes on the
digital display, and the buzzer sounds.
If in the (SET UP 3) menu, CLOG DETECT. is set to
"N", the recording quality is not monitored.
NOTES:
œ To cancel the "m" indicator display and reset the
WARNING OUT terminal output, press the STOP
button.
œ Clog detection is not possible if recording in 3-hour
mode.
16
English