Connecting Aux; Connecting The Speakers; Connecting The Ac Power Cord - VIETA VMD95LS Instruction Manual

Connecting AUX

Connecting AUX Connecting AUX
Connecting AUX Connecting AUX
This sub-woofer has two audio input terminals, you can use signal line to connect audio input
terminals of this unit and audio output terminals of other equipment respectively, then you can
hear the sound sources.
Caution: Press the function select button Caution: Caution:
Caution: Caution:
select AUX function. When you are connecting AUX audio terminals, please press
this function button.
Terminal board for Sub-Woofer

Connecting the Speakers

Connecting the Speakers Connecting the Speakers Connecting the Speakers Connecting the Speakers
Connect the speaker cords between the terminals as shown below.
Connect the cords with a gold line to the (+) (L) (R) terminals and cords with a silver line to the (-)
(G) terminals.
Right Speaker Box Back View
Connection precautions Connection precautions Connection precautions
Connection precautions Connection precautions
1. This unit has a high power output and wide dynamic range. If speakers other than those
supplied are used, they must be chosen according to speaker specification, or the speakers
can be damaged.
2. Before connecting or removing mains power, please turn off the power on the unit and turn
the volume to minimum or it may damage the speakers.

Connecting the AC Power Cord

Connecting the AC Power Cord Connecting the AC Power Cord Connecting the AC Power Cord Connecting the AC Power Cord
Insert the AC power cord into a wall outlet, and your system is at your command!
Caution: Caution:
Caution: Caution: Be sure to unplug the power cord from the outlet when going away or the system is Caution:
not in use for an extended period of time.
on the unit or on the remote control to
FUNCTION FUNCTION FUNCTION FUNCTION FUNCTION
Left Speaker Box Back View
7
Auxiliary Equipment