1. Manuals
  2. Brands
  3. VIETA Manuals
  4. Car Stereo System
  5. VPC55BT
  6. User manual

VIETA VPC55BT User Manual

Radio cd mp3
Hide thumbs Also See for VPC55BT:
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for VIETA VPC55BT

Summary of Contents for VIETA VPC55BT

  • Page 2: Note Of Discs

    NOTE OF DISCS MOISTURE CONDENSATION On a rainy day or in a very damp area, moisture may condense on the lenses inside the unit. Should this occur, the unit will not operate properly. In such a case, remove the disc and wait for about an hour until the moisture has evaporated.
  • Page 4 Removing the unit a. Frame b. Insert fingers into the groove in the front of frame and pull out to remove the frame. (When re-attaching the frame, point the side with a groove down wards and attach it.) c. Insert the levers supplied with the unit into the grooves at both sides of the unit as shown in figure until they click.
  • Page 5 3. DETACHABLE CONTROL PANEL (D.C.P .) Removing The Detachable Control Panel (D.C.P .). 1. Turn the power off 2. Press the D.C.P . release button 3. Remove the D.C.P . PANEL RELEASE BUTTON Attaching the DCP 1. Attach the panel at the right side first, with point B on the main unit touching point A on the D.C.P .

  • Page 6: Wiring Diagram

    4. WIRING DIAGRAM ANTENNA ANTENNA EXTENDER JACK CABLE FUSE AUX LINE IN YELLOW WHITE 20-PIN BLUE AUDIO/POWER HARNESS (See Figure 1) RCA-TO-RCA CABLES WHITE (not supplied) SUB WOOFER WOOFER iPod RCA-TO-RCA CABLES WHITE (not supplied) GREY REAR LINE OUT WHITE BLACK FRONT LINE OUT WARNING Connecting the ISO Connector...

  • Page 7: Ejecting A Cd

    5. PANEL OPEN/CLOSE OPERATION This unit is equipped with the most advanced full logic motorized slide down system. You can enjoy this advance technology with just a single press of the “OPEN” button Please read carefully the following operation instruction before operating the unit. OPEN / CLOSE THE PANEL Press the Open button to slide down (open) a closed panel or to slide up (close) an opened panel.

  • Page 8: Control Panel Function

    6. CONTROL PANEL FUNCTION OPERATIONS: SYSTEM TUNER CD/M P3/W MA Blu e Tooth iP od Short Long Short Long Short Long Short Long Short Long Press Press Press Press Press Press Press Press Press Press Mute Power Panel Open & Close Eject Panel release button Ph on e...

  • Page 9: Basic Operations

    7. BASIC OPERATIONS ANIMATRIX MODE Under playback mode, pressing the “ ” button on the panel repeatedly to select the favor animation display mode: > > > > > PANEL RELEASE BUTTON (REL) Press this button to remove the control panel. POWER ON/OFF BUTTON ( Press POWER button or any other button on the front of the radio (except Open/Eject) to turn the unit on.
  • Page 10 AUX INPUT Connect the external device to the RCA line in jack located at the rear of the unit , then press Mode button to select Aux mode. Press Mode Button again to exit Aux Mode and select other mode. Connect the external device to AUX in jack located on the AUX IN FRONT CABINET...

  • Page 11: System Menu Operation

    8.SYSTEM MENU OPERATION User can adjust the system setting in this unit by entering into the system menu, please read the below details operation for each system menu items: Access into System Menu Function List Long press the MENU button for more than 3 seconds to access into the system menu items.
  • Page 12 Bass When in BASS, user can use the track up or down button to select the desired bass parameter and rotate the encoder knob to change the desired parameter: 1. LEVEL: adjust the bass level from -6 to +6. 2. C.FREQ: adjust the bass center frequency as 60Hz, 80Hz, 100Hz, or 200Hz. 3.

  • Page 13: System Function Menu

    Treble When in TREBLE, user can use the track up or down button to select the desired TREBLE parameter and rotate the encoder knob to change the desired parameter: 1. LEVEL: adjust the Treble level from -6 to +6. 2. C.FREQ: adjust the Treble center frequency (C.FREQ) as10KHz, 12.5KHz, 15KHz, or 17.5KHz.
  • Page 14 Key Beep Tone The beep tone feature allows the selection of an audible beep tone to be heard each time any button is being pressed on the panel of this unit. "On" is the default. Rotate the encoder knob to select the "Off" option. Program Vol This option allows the setting of the volume level of this unit will automatically assume when first turned on.

  • Page 15: Display Setting Menu

    Regional- On/Off selection REGIONAL “OFF” will be displayed by default. If “on” is selected, then during an AF search or PI seek, it will implement to station which have all the PI codes which are the same as the current station. If “off” is selected, then during an AF search or PI seek the regional code in the format PI code will be ignored.
  • Page 17 Paring – with Bluetooth device This feature is used for the pairing of this unit's Bluetooth system to mobile phone or other Blue tooth device. Under the “Pairing” mode, press the “MENU” button to activate the Pairing. Tips Please refer to “PAIRING, CONNECTING AND DELETING WITH A BLUETOOTH DEVICE”...

  • Page 18: Tuner Operation

    9. TUNER OPERATION NAVI LIST SEARCH ( NAVI ) Using the advance NAVI list search method on this unit, user can press he NAVI button access into the NAVI SEARCH mode, then rotate the encoder knob to select the desired preset memory station to listen.

  • Page 19: Rds Operation

    10. RDS OPERATION RDS functions The unit is equipped with the following RDS function: - AF Alternative Frequencies - CT Clock Time - PI Program identifications - PS Program service name - PTY Program Type - REG Regional Change - TA Traffic Announcement - TP Traffic program AF Function By pressing AF button <...
  • Page 20 BR - 20...
  • Page 21 Up to 200 characters can be displayed in the long file name format. The media reproducible on this unit has the following limitations: Maximum number of nested folders: 8 Maximum number of files per disc: 999 Maximum number of files per media device: 2000 Maximum number of folders per disc: 255 MP3/WMA written in the formats other than the above may not be successfully played and their file names or folder names may not be properly displayed.
  • Page 22 Files Playing Order When selected for play, Folder Search, File Search or Folder Select, files and folders are accessed in the order in which they were written by the PC writer. Because of this, the order in which they are expected to be played may not match the order in which they are actually played.
  • Page 23 File/folder Repeat Play Press M3 button more than 3 seconds during playing MP3/WMA disc for “repeat play” all files of the current folder. And keep on repeat playing the current folder until “repeat play” is disabled. To disable current folder “repeat play”, long press M3 button more than 3 seconds Press M3 button less than 3 seconds to “repeat play”...

  • Page 24: Usb Operation

    12. USB OPERATION The unit can support USB Host Function. It can playback MP3 and WMA Audio format which are stored into USB Memory Stick or USB interface Music Player. Please read below before you start the operation of USB HOST Function. Inserting and Removing USB Drive Mini USB big USB...

  • Page 25: Memory Card Operation

    13. MEMORY CARD OPERATION The unit can support playback MP3 and WMA Audio format which are stored into SD and MMC Memory Card . Please read below before you start the operation of Memory Card. Inserting and Removing a SD or MMC card on the main unit Face Click Insert the Memory Card...
  • Page 26 BR - 26...
  • Page 27 a. Under recording mode, all the FM/iPod/AUX operation is not functional, like Tune Up / Down , Preset Memory 1 -6 etc. b. The Audio will remain in recording mode even MUTE function is activated. c. The Recording will automatically stop if the storage device memory is full. Tips Record Quality- The unit have TWO record quality mode, Standard &...
  • Page 28 BR - 28...
  • Page 29 WARNING: 1. Never remove the USB Stick while recording to USB Stick. It may damage the USB Stick and sometimes will caused the unit system lock up. 2. This is not recommend to insert USB stick while recording is under progress to other storage device.
  • Page 30 BR - 30...
  • Page 31 Under transferring mode, All the MP3/WMA operation is not functional, like file up / down, Repeat, Random, and Intro etc. The audio will remain recording by the unit system even MUTE function is activated The Transferring will automatically stop if the storage device memory is less than 2MB WARNING: 1.
  • Page 32 BR - 32...

  • Page 33: Files Manager

    18. FILES MANAGER The advance “File Management.” System of this unit can help to well you organize all the music files just like a PC . Please read below for details: FOLDERS MANAGEMENT This unit will automatically self-create the below default folders onto any USB /SD / MMC media device, once these devices are inserted into the unit.

  • Page 34: Ipod Operation

    19. iPod OPERATION This unit is equipped with iPod Ready function which allow end user to have direct control of the iPod on the unit and display iPod song information on the unit's LCD display. Please read below for more details operation. iPod Compatibility Chart This unit is support following iPod software version iPod 1G...
  • Page 35 Switch to iPod Mode When the Head unit is power on and iPod is connected to the 30 pin connector, press the mode button to change to iPod mode and the then starts Reading the music files contained in the iPod and the playback will automatically start. Press Mode button repeatedly to change to other modes or switch back to iPod mode.
  • Page 36 BR - 36...
  • Page 37 User Guide For Blue Tooth Operation 1. When user use our Blue tooth HEAD UNIT, please make sure the mobile phone you use must / does support Blue tooth functions (Headset or Handsfree profiles or both). 2. Before you start to use our Bluetooth HEAD UNIT, please make sure complete pairing with your mobile phone first.
  • Page 38 Bluetooth Mobile Phone Compatibility List This unit can support bluetooth specification v1.2 or higher, and compatible with bluetooth profiles such as handsfree or headset profiles. however the functionality may be limited due to some phones' own dedicated interfacing specification. This list is only updated to the time this list is being printed. This list gives an example of bluetooth mobile phone available on the market, if your bluetooth mobile phone is not on the list, please try it out in practice or try your phone at the local dealer or consult with the local dealer in case it is not mentioned in the list.
  • Page 39 Nokia 8910 6600 6230 7600 Features Caller ID Pairing Pairing Pairing cancel In-Band Ring Tone Ringing Talk Reject Audio Transfer Talking Volume up/down Hang up Audio Transfer Dialing Volume up/down Redial last call 6230i 7380 6111 Features Caller ID Pairing Pairing Pairing cancel In-Band Ring Tone...
  • Page 40 Motorola E398 V600 V501 Features Caller ID Pairing Pairing Pairing cancel In-Band Ring Tone Ringing Talk Reject Audio Transfer Talking Volume up/down Hang up Audio Transfer Dialing Volume up/down Redial last call Panasonic & Sharp Panasonic X88 GX-T15 GX-T71 Features Caller ID Pairing Pairing...
  • Page 41 Siemens & BenQ Features Caller ID Pairing Pairing Pairing cancel In-Band Ring Tone Ringing Talk Reject Audio Transfer Talking Volume up/down Hang up Audio Transfer Dialing Volume up/down Redial last call Dopod & MIO & Blackberry A700 8700 Features Caller ID Pairing Pairing Pairing cancel...
  • Page 42 Samsung & LG D528 KG320 D508 Features Caller ID Pairing Pairing Pairing cancel In-Band Ring Tone Ringing Talk Reject Audio Transfer Talking Volume up/down Hang up Audio Transfer Dialing Volume up/down Redial last call BR - 42...

  • Page 43: Answering An Incoming Call

    Answering An Incoming Call Panel Function Button Blue Tooth Hand Free Function - Enter phone number input mode SYSTEM MENU - Under phone number input mode Encoder volume Knob Use as numeric input - Under an incoming call use as reject call BAND - Under phone number input mode use as edit number.
  • Page 44 Pairing, Connecting And Deleting With A Bluetooth Device When connecting Bluetooth devices at the first time with this unit, a mutual registration is required, this is called “Pairing”. This registration (Pairing) is required only at the first time, as this unit and the other devices will recognize each other automatically from the next time.
  • Page 45 Method 2-Searching this unit for Pairing “from a other Bluetooth Device ”. (1) Set the other Bluetooth device which need to be paired with this unit into “Searching” mode . a. To allow this unit searching by the other device, the “VISIBILITY” in the MENU of BT must be set to “SHOW”.
  • Page 46 If the Bluetooth icon disappears from the display, it means the Tips connectivity of the Bluetooth device with this unit is lost. (2) Some models of mobile phone after the call transfer mode is activated, and call is transferred to the Mobile Phone, the connectivity will be lost with this unit. (3) User has paired with more than one Bluetooth devices in the list, and want to reconnect with one of them again.

  • Page 47: Ending A Call

    Hands-Free Phoning Answering An Incoming Call User can press the “ENTER” (MENU) button or “MODE” button to answer / accept the incoming call. (1) When there is an incoming call, the ring tone is output from the car speaker, and the caller number will be shown on the display.

  • Page 48: Auto Answer Mode

    d. During the talking mode, if the Ignition is being turned off, the unit will keep the conversation even if the Ignition is Switched off. After the conversation is finished, user can press the “CLEAR” button to switch off the unit. To Activate The Privacy Talking Mode (Incoming Call Transfer Mode) During the talking mode, user can LONG press the “TRANSFER”...
  • Page 49 To Set The Incoming Ring Tone Level This unit allows the user to preset the most suitable incoming call ringing volume level from the car speakers. The factory default is set at '20'. User can adjust the volume level in the MENU of BT – PHONE VOLUME Please refer to MENU Operation for more details of how to access into and operates the MENU of BT –...
  • Page 50 Bluetooth Audio Streaming A2DP (Advanced Audio Distribution Profile) User can listen to music files on an audio device on this unit if the audio device supports A2DP (Advanced Audio Distribution Profile) of Bluetooth Technology. Please read the below instruction before operating the Bluetooth Audio streaming function on this unit.
  • Page 51 Operating an audio device with this unit AVRCP ( Audio Video Remote Control Profile ) This unit can perform the following operations with the connecting Audio device which supports AVRCP (Audio Video Remote Control Profile) & only if the Audio device does support AVRCP.
  • Page 52 BR - 52...
  • Page 53 BR - 53...
  • Page 54 Hands Free Phoning Is Not Supported While Music File Download If the download Bluetooth device is a Hand Phone with HFP (Hands free profile) & connected to this unit, during the file download, all the hands free function are NOT SUPPORTED at this moment, the Bluetooth hands free will automatically RESUME only after the file download is completed.

  • Page 55: Remote Function

    21. REMOTE FUNCTION OPERATIONS: SYSTEM TUNER CD/M P3/W MA Blu e Tooth iP od Short Long Short Long Short Long Short Long Short Long Press Press Press Press Press Press Press Press Press Press Power Panel Open & Close Eject NAVI Ca ll Mode...

  • Page 56: Specifications

    23.SPECIFICATIONS CD PLAYER Compact disc audio system System Compact disc Usable disc 44.1KHz Sampling frequency 1bit No of quantization bits 5-20,000Hz Frequency 2 stereo Number of channels 70dB S/N Ratio MEDIA SECTION USB Host Host 1.1 compatibles 2.0 Memory Card SD and MMC (32MB up to 2GB) Nand Flash 1GB Built-in Flash Memory...

  • Page 57: Troubleshooting

    24.TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. Symptom Cause Solution The car ignition is not on. No power If the power supply is properly connected to the car accessory terminal, switch the ignition key to “ACC”...

This manual is also suitable for:

Ccm5000bt

Table of Contents