Advertisement

Quick Links

INSTRUCTION BOOKLET
DISHWASHER
ZIDW 956

Advertisement

Table of Contents
loading

Summary of Contents for Zanussi ZIDW 956

  • Page 1 INSTRUCTION BOOKLET DISHWASHER ZIDW 956...
  • Page 2: Table Of Contents

    CONTENTS Warnings ...............page Installation .
  • Page 3: Warnings

    Care must be taken to ensure that the appliance does not stand on the electrical supply cable or on the water inlet and drain hoses. Zanussi dishwashers are designed to be used for washing normal household utensils. Items that are contaminated by petrol, paint, steel or iron debris, corrosive, acidic or alkaline chemicals are not to be washed in a dishwasher.
  • Page 4: Installation

    INSTALLATION Remove all packaging before positioning the The water supply hose is fitted with a safety device, machine. which prevents water from entering the machine should the inner hose split, due to wear. Positioning The problem is signalled by a red or yellow indicator which appears in window (B - If possible, position the machine next to a water tap and a drain.
  • Page 5: Use

    Control panel PROGRAMME DELAY ECONOMY SELECTOR START CANCEL THE CONTROLS 1. ON/OFF In this fully integrated appliance the controls are located on top of the door. When selecting a programme, the Press this button to preset the dishwasher to accept door needs to be partially opened.
  • Page 6 5. Economy dry button 7. Cancel / programme change button When this button is pressed, the last rinse water is not If you wish to cancel a programme which is already heated, with a significant saving in electrical energy. running or a setting which has just been made, press The corresponding pilot light comes on.
  • Page 7 Rinse aid Use of detergent This liquid gives the dishes a shiny finish and Before starting any of the dishwashing programmes, improves drying. It is automatically added during the except for the rinse and hold programme, load the hot rinse. The dispenser, which is positioned inside detergent in the dispenser.
  • Page 8 Loading your machine The cutlery basket is in two parts which can be Before placing dishes in the machine, remove any separated to give greater scraps of food from the plates (small bones, loading flexibility. To separate toothpicks, fish bones, scraps of meat and vegetables, the two parts, slide them hori- fruit skins etc.) to avoid clogging the filters and zontally in opposite directions...
  • Page 9: Adjusting The Height Of The Upper Basket

    Caution Adjusting the height of the upper basket To ensure proper water dis- If washing very large plates (over 27 cm and up to 31 tribution to the upper basket, cm in diameter) you can load them in the lower do not place dishes over the basket after moving the upper basket to the higher hole in the SID (Super Inten-...
  • Page 10: Washing Programmes

    WASHING PROGRAMMES Recommended quantity of detergent Cycle Degree of soil and Pro- Recommended Required Description in the in the type of load gramme programme Pushbuttons Super Intensity dispenser Dispenser Any. RINSE 1 cold rinse (to avoid Programme Partial load (to be food scraps from Selector completed later in the...
  • Page 11: Operating Sequence

    Operating Sequence 7. Starting the wash programme Open the water tap. 1. Check that the filters are clean Close the dishwasher door. (see cleaning instructions) An audible signal lasting about 1 second informs you that the programme has been started. 2.
  • Page 12: Maintenance And Cleaning

    MAINTENANCE AND CLEANING Cleaning the central filters Internal and external cleaning (After each wash) You must ensure that the seals around the door, the Inspect the central filters (B) and (C) and remove any detergent and rinse aid dispensers are cleaned regu- scraps of food with a brush, under running water.
  • Page 13: Prolonged Periods Of Non-Operation

    Prolonged Periods of Non-Operation If you are not using the machine for any period of time you are advised to: unplug the appliance and turn off the water; fill the rinse aid dispenser; leave the door ajar to prevent the formation of unpleasant smells;...
  • Page 14: Servicing

    SERVICING Certain problems are due to lack of simple maintenance or oversights and can be solved easily without having to call out an engineer. Therefore before calling the Service, consult the check list here below. The following alarms, in the form of letters (A, C, F, L, H, P) flash in the digital display window. The dishwasher fails to start or stops during operation;...
  • Page 15 Visible lime deposits or white film on the Protection against flooding dishes In order to prevent water floods, the dishwasher has been provided with two additional devices, having the The rinse aid has run out or too little is being used. following characteristics: 1.
  • Page 16: Building-In

    BUILDING-IN Building-in features Mounting of decor panel onto the door The height of the panel depends on the height of the This dishwasher is designed to be fitted under a kitchen plinth of adjacent kitchen units (see kitchen plinth counter or sink. adjustment).
  • Page 17 Fixing to the adjacent units Levelling Insert the two fixing brackets Make sure that the dishwasher door closes properly, into the slots provided in the without rubbing on sides. Otherwise level the machine top front part of the dish- by slightly screwing or unscrewing the two front feet washer, as shown in the fig- until perfect closure of the door is reached.
  • Page 18 Printed in Italy 0/0897 152995 51/0...

Table of Contents