Base Colour Adjustment; Colour Temperature; Auto Brightness Sensor Settings - Toshiba REGZA RL83 Digital Series Owner's Manual

CONTROLS AND FEATURES

Base Colour Adjustment

The Base Colour Adjustment feature allows the adjustment of
individual colours to suit personal preference. This can be useful
when using an external source.
a
In the Advanced Picture Settings menu, press
select Base Colour Adjustment, and then press OK.
b
B b
Press or to select an option, and then press
move to the adjustment window.
Base Colour Adjustment
Hue
Red 0
Green
0
Blue 0
0
Yellow
0
Magenta
Cyan 0
Reset
c
C c
Press or to select Hue, Saturation or Brightness,
B
and then press or
required.
Hue
Red 0
d
Press RETURN to return to the previous menu.
To return to the factory settings, select Reset and
press OK.

Colour Temperature

Colour Temperature increases the 'warmth' or 'coolness' of the
picture by increasing the red or blue tint.
a
In the Advanced Picture Settings menu, press
select Colour Temperature and press OK.
b
C c
Press or to adjust the level.
The adjustment range is 0 (warm) to 10 (cool).
NOTE: If Picture Mode is set to AutoView, the adjustment
range is -5 to +5.
b
Brightness
Saturation
0 0
0 0
0 0
0 0
0 0
0 0
b
to adjust the settings as
Saturation Brightness
0 -1
b

Auto Brightness Sensor Settings

When the Auto Brightness Sensor is activated, it will
automatically optimise the backlighting levels to suit ambient
a
to In the Advanced Picture Settings menu, press
select Auto Brightness Sensor Settings and press
OK.
c
to
b
C
Press or
Auto Brightness Sensor Settings
Auto Brightness Sensor
Backlight Adjustment Pro
c
b
Press to select Backlight Adjustment Pro and
press OK.
d
The Backlight Adjustment Pro window will appear.
Press OK again to display the adjustment window.
e
C
Press or
adjust the level.
Backlight Adjustment Pro
100
Control
Level
0
f
Press OK to fix the adjustment.
To cancel the adjustment when selecting a point,
select Cancel and press OK.
To return the adjustments of all points to the factory
to
defaults, select Reset and press OK.
26
light conditions.
c
to select On and press OK.
c
to select a point and press
48
Backlight Control Level
Ambient Light
b
to
On
B b
or to
Cancel
Reset