Toshiba RD-XS24SB Owner's Manual page 15

3
Connect to a TV equipped with SCART inputs.
Connect as below for watching received channels or recorded contents. Watching via the RF OUT terminal
is not available.
• The following setting is required according to the TV that
you are connecting.
TV
Normal TV
TV compatible with S video signals
RGB monitor
4
Connect the power cord of the recorder to a wall outlet.
To wall outlet
Notes
• Refer to the owner's manual of the connected TV as well.
• When you connect the recorder to your TV, be sure to turn off the power and unplug both units from the wall outlet before any
connections.
• Connect the recorder directly to your TV. If you connect the recorder via a VTR, TV/VTR combination or video selector, the
playback picture may be distorted due to copy protection.
SCART cable (not supplied)
To AV1(TV)
Setting
"AV1 output" on the "Initial
settings" menu.
"Video"
"S-Video"
"RGB"
For connections to TVs with no SCART
inputs, see "Connecting to a TV equipped
with phono type jacks" (
page 32
To SCART input
page 16).
• Normal TV
• TV compatible with S video signals
• RGB monitor
15