Antenna Connection - Toshiba RD-XS35SU Quick Reference

Settings
(Continued)
7
Tuning channel for the cable box
STEP 2: Configuring for Cable
To operate properly with your cable box, the TV Guide On Screen system needs to
know the channel your DVD Recorder is on when using the cable box. The most
commonly used output channel is 03. Please consult your cable box provider if you are
unsure, as an incorrect selection will result in a blue or snowy screen while
watching TV.
What is your DVD Recorder tuned to when using the cable box?
Ch 2
Ch 3
Ch 4
Using your DVD Recorder remote, move up or down to highlight your answer. Press
Press / to select, then press ENTER.
8
Read the instruction and the diagram,
and confirm the G-LINK
properly installed.
If OK, press ENTER.
9
Cable box brand name
STEP 2: Configuring for Cable
Selecting the correct cable box brand from the list is needed to automatically
receive program listings. If you do not know the cable box brand, please consult
your cable provider.
What brand of cable box is connected to this DVD Recorder?
Not listed
Archer
Cable Cinema
Cabletenna
Using your DVD Recorder remote, move up or down through the list to find your
brand (move down for more brands). Press Enter to choose.
Press / to select, then press ENTER.
10
Cable box preparation
STEP 2: Configuring for Cable
The TV Guide On Screen will conduct a series of tests to find the
correct code to control your cable box.
Follow steps A and B below
A: Please tune your cable box to channel 02
B: Make sure to leave your cable box turned ON
Once you have completed these steps, press Enter on the DVD Recorder remote to
Follow the instructions, then press
ENTER.
RDXS35SUqE
Enter to choose.
® cable is
begin testing.
– 6 –
6
11
Cable box code testing
STEP 2: Configuring for Cable
Cable testing in progress... please do not press any keys on
any remote control.
Now testing code 036 (Toshiba)...
Press Enter to continue.
When testing is done, the following screen
automatically appears.
STEP 2: Configuring for Cable
The TV Guide On Screen system needs to locate the correct code for yourcable box
brand in order to work properly.
Is your cable box now tuned to channel 09?
Yes
No
Test the code again
Using your DVD Recorder remote, move up or down to highlight your answer. Press
Press / to select, then press ENTER.
If your answer is "Yes", and:
• if you selected "TUNER" at step 6,
you will go to step 13.
• if you selected "Line 1" at step 6,
you will go to step 12.
12

Antenna connection

STEP 3: Configuring for Antenna
To supply your DVD Recorder with correct program listings, the TV Guide On Screen
system needs to know if you have attached an antenna to your DVD Recorder to
receive over-the-air stations.
Do you have an antenna connected to your DVD Recorder?
Yes
No
Using your DVD Recorder remote, move up or down to highlight your answer. Press
Press / to select, then press ENTER.
06.2.13, 5:41 PM
Enter to choose.
Enter to choose.