Add Device - TP-Link TL-PA250 User Manual

TL-PA250 AV200+ Powerline Adapter with AC Pass Through
Note:
The Powerline Adapter device must be present on the power line (plugged in) in order for the password
to be confirmed and added to the network. If the Powerline Adapter device could not be located, a
warning message will be shown.

4.1.3 Add Device

The following dialog box will pop up when clicking the "Add" button under the Main configuration
homepage. The dialog box allows you to enter both the selected device's name and password. Note that
the Powerline Adapter must be present on the power grid in order to activate the set password and be
added to the local network.
Enter your Device Name and Password (Take note of the password format) and click "OK" after setup.
The following screen will display after the naming and password setting process, which is also the
Diagnostics configuration homepage.
15