TP-Link TL-SG2216 User Manual page 95

The following entries are displayed on this screen:
VLAN Config

VLAN ID:
Router Port Time:
Member Port Time:
Leave Time:
Static Router Port:
VLAN Table

VLAN ID Select:
Select:
VLAN ID:
Router Port Time:
Member Port Time:
Leave Time:
Figure 8-6 VLAN Config
Enter the VLAN ID to enable IGMP Snooping for the desired
VLAN.
Specify the aging time of the router port. Within this time, if the
switch doesn't receive IGMP query message from the router port,
it will consider this port is not a router port any more.
Specify the aging time of the member port. Within this time, if the
switch doesn't receive IGMP report message from the member
port, it will consider this port is not a member port any more.
Specify the interval between the switch receiving a leave
message from a host and the switch removing the host from the
multicast groups.
Enter the static router port which is mainly used in the network
with stable topology.
Click the Select button to quick-select the corresponding VLAN
ID based on the ID number you entered.
Select the desired VLAN ID for configuration. It is multi-optional.
Displays the VLAN ID.
Displays the router port time of the VLAN.
Displays the member port time of the VLAN.
Displays the leave time of the VLAN.
87