10.3.3 VLAN Binding
On this page you can bind a policy to a VLAN.
Choose the menu ACL→Policy Binding→VLAN Binding to load the following page.
The following entries are displayed on this screen:
VLAN-Bind Config
Policy Name:
VLAN ID:
VLAN-Bind Table
Index:
Policy Name:
VLAN ID:
Direction:
Configuration Procedure:
Step Operation
1
Configure ACL rules
2
Configure Policy
3
Bind
the
policy
port/VLAN
Note:
For TL-SG2216/TL-SG2424/TL-SG2424P, you can bind one policy to multiple VLANs; but for
TL-SG2452, you can bind one policy to only one VLAN
Figure 10-11 Bind the policy to the VLAN
Select the name of the policy you want to bind.
Enter the ID of the VLAN you want to bind.
Displays the index of the binding policy.
Displays the name of the binding policy.
Displays the ID of the VLAN bound to the corresponding policy.
Displays the binding direction.
Description
Required. On ACL→ACL Config configuration pages,
configure ACL rules to match packets.
Required. On ACL→Policy Config configuration pages,
configure the policy to control the data packets those match
the corresponding ACL rules.
to
the
Required. On ACL→Policy Binding configuration pages,
bind the policy to the port/VLAN to make the policy effective
on the corresponding port/VLAN.
120