Getting Started; Package Contents; Installation Requirements; Installation Procedure - Western Digital TV Live User Manual

Getting Started

4

Package Contents

WD TV Live HD Media Player
AC power adapter

Installation Requirements

Standard or HD TV with a composite (standard A/V), component (YPbPr), HDMI,
or S/PDIF input
USB storage device with a USB 2.0 connector
Valid wired or wireless network connection
Media Library support requirement* —1% of total storage capacity
Optional: TV, stereo, or AV receiver with an optical digital (Toslink) or stereo audio
input jack (audio playback only); Ethernet cable
*Can be turned off in Settings Menu if not needed.

Installation Procedure

The media player installation procedure is outlined below:
1. Transfer content from your computer to the USB storage media.
2. Connect the media player to your TV or entertainment unit through the desired
interface option.
3. Connect the power cable.
4. Insert the batteries into the remote control.
5. Connect the USB device containing your media content or establish a wired or
wireless network connection.
Composite AV cables
Component (YPbPr) cables
Quick Install Guide
WD TV Live HD Media Player
User Manual
Remote control and
Two AAA batteries
Documentation and
software CD
GETTING STARTED – 12