Problem With Agp Aperture Size - Creative 3D Blaster RIVA TNT2 M64 Product Manual

Problem with AGP
Aperture Size
Changing settings in CMOS
incorrectly can cause the system
to stop functioning.
Some of the steps from step 3
onwards may not apply to your
system's CMOS. Refer to your
system's CMOS documentation
for more details.
DirectDraw/Direct3D fails to use hardware acceleration (HAL).
Cause The CMOS setting for the AGP Aperture size is less than 8 MB.
Solution Set the AGP Aperture size to 8 MB or more.
Do the following in CMOS:
1. Restart your system.
2. During the memory check, press <Delete>.
The CMOS setup menu appears.
3. Select Chipset Features Setup and press <Enter>.
4. Set your AGP Aperture Size (MB) to 8 MB or more.
5. Press <Esc> to return to the CMOS setup menu.
6. Select Save & Exit Setup, and then press <Enter>.
7. Press <Y> and then press <Enter>.
Product Guide 25