Automatic Operation (Auto Changeover) - Toshiba RAS-M10SMUV-E Owner's Manual

AUTOMATIC OPERATION
When you set the air conditioner in AUTO mode, it will automatically select either cooling, heating, or fan only
operation depending on the outdoor temperature. (Refer to page 15.)
In addition, fan speed is automatically controlled.
Start
1
START/STOP button
Push this button to start the air conditioner.
2
AUTO button (AUTO)
Push AUTO button.
3
Temperature button (
Set the desired temperature.
• The OPERATION lamp (green) on the panel of the indoor unit illumi-
nates. The operating mode is selected in accordance with the room
temperature and the operation starts after approximately 3 minutes.
• If the AUTO mode is uncomfortable, you can select the desired
conditions manually.
• Fan speeds and louver position can be changed.
When it is changed, the MODE is also changed from AUTO to A.
At the same time, fan speed indication is displayed.
Stop
START/STOP button
Push this button to stop the air conditioner.

AUTOMATIC OPERATION (AUTO CHANGEOVER)

When you set the air conditioner in A mode or switch over from AUTO operation because setting may have
been changed, it will automatically select either cooling, heating or fan only operation depending on the
outdoor temperature. (Refer to page 15.)
Start
1
START/STOP button
Push this button to start the air conditioner.
2
Mode select button (MODE)
Select A.
3
Temperature button (
Set the desired temperature.
4
Fan speed button (FAN)
Select one of "AUTO" LOW
HIGH .
• The OPERATION indicator (green) on the panel of the indoor unit
illuminates. The operating mode is selected according to the room
temperature and operation starts after approximately 3 minutes.
• The temperature, fan speeds and louver position can be changed.
You can select the desired conditions manually.
Stop
START/STOP button
Push this button to stop the air conditioner.
)
)
, LOW + , MED , MED
9
3
1
FAN
2
SWING
ON
3
1
+ ,
4
FAN
2
SWING
ON
˚ C
AM
:
PRESET
START/STOP
MODE AUTO
ECO Hi POWER
TIMER TIMER
FIX MEMO
OFF SET CLR
FILTER
RESET CLOCK CHECK
˚ C
AM
:
AUT UTO
PRESET
START/STOP
MODE AUTO
ECO Hi POWER
TIMER TIMER
FIX MEMO
OFF SET CLR
FILTER
RESET CLOCK CHECK