Automatic Operation (Auto Changeover) - Toshiba RAS-18UFHP-ES Owner's Manual

AUTOMATIC OPERATION
When you set the air conditioner in AUTO mode, it will automatically select cooling, heating, or fan only
operation depending on the room temperature. (
In addition, fan speed and louver are automatically controlled.
Start
1 START/STOP button 1 1 1 1
Press this button to start the air conditioner.
2 2 2 2 2 AUTO button (AUTO)
Press AUTO button.
• The OPERATION lamp (green) on the display panel of the
indoor unit lights. The operating mode is selected in accordance
with the room temperature and operation starts after approximately
3 minutes.
• If the AUTO mode is uncomfortable, you can select the desired
conditions manually.
Temperature, fan speed and louver position can be changed.
When fan speed or louver position is changed, MODE is also
changed from AUTO to A.
At the same time, fan speed and louver positioning indications are indicated.
Stop
START/STOP button
Press this button again to stop the air conditioner.

AUTOMATIC OPERATION (AUTO CHANGEOVER)

When you set the air conditioner in A mode or switch over from AUTO operation because of some settings
change, it will automatically select cooling, heating, or fan only operation depending on the room temperature.
( see page 15.)
Start
1 1 START/STOP button 1
1 1
Press this button to start the air conditioner.
2 2
2 Mode select button (MODE) 2 2
Select A.
3 3
3 3 Temperature button ( 3
Set the desired temperature.
• The OPERATION lamp (green) on the display panel of the
indoor unit lights. The operating mode is selected in accordance
with the room temperature and operation starts after approximately
3 minutes.
• When you select the A mode, it is unnecessary to set the fan speed.
The FAN speed display will show AUTO and the fan speed will be
automatically controlled.
• If the A mode is uncomfortable, you can select the desired
conditions manually.
Stop
START/STOP button
Press this button again to stop the air conditioner.
Downloaded from AC-Manual.com Manuals
see page 15.)
)
8
AUTO
PRESET
1 1
START/STOP
2 2
FAN MODE
SWING ECO Hi-POWER
TIMER
FIX MEMO
ON OFF SET
FILTER
RESET CLOCK CHECK
A
3 3
PRESET
1 1
START/STOP
FAN MODE
2 2
SWING ECO Hi-POWER
TIMER
FIX
ON OFF SET
FILTER
RESET
AUTO
CLR
AUTO
MEMO
CLR
CLOCK CHECK
EN