Table of Contents
Advertisement
Formatting an SD card
SD memory cards are sold with format in conformity to the Standards of SD
memory card. If you format the SD card again, be sure to format it with the
utility of TOSHIBA SD memory card format, not in the format defined as the
Windows standard format.
In order to run TOSHIBA SD memory card format, click Start, point to All
Programs, point to TOSHIBA, point to Utilities and click SD memory card
Format.
TOSHIBA SD memory card format does not format the protected area of
SD memory card. When you format all area of the SD memory card
including the protected area, use the application that responds to the copy
protection system.
Inserting an SD card
To insert an SD card, follow the steps below.
1. Insert the SD card in the SD card slot.
2. Press gently to ensure a firm connection.
Make sure the SD card is oriented properly before you insert it.
Removing an SD card
To remove an SD card, follow the steps below.
1. Open the Safety Remove Hardware icon on the Task Bar.
2. Point to SD card and click.
3. Push in the card and release it to pop the card out slightly.
User's Manual
Inserting an SD card
Optional Devices
SD card slot
SD card
SD card indicator
8-4
Advertisement
Table of Contents
