Connecting Pc And Data Transmission; Use Micro Sd Card - HANNspree HANNSpad SN1AT7 User Manual

2.3 Connecting PC and Data Transmission

Use the supplied USB cable, connect the device to the PC to transfer data or power up the device.
Enter the USB disk mode to copy and delete files to and from the PC.
When the operation menu appears, click "USB
connected": Click "Turn on USB storage" on the
prompting window, then enter the data transmission
state.
• At this time, you can locate the tablet storage card
and SD card (if the card has been plugged in) in
My Computer list.
• After data transmission, click "Turn off USB
storage", and then it will quit the data transmission
state.
NOTE: Before quitting the state of data transmission, if the system of U disk or card is NTFS, please safety
remove them from the PC, then click "close USB storage device", otherwise the file may be missing.

2.4 Use Micro SD card

After connecting the device to a PC, you will find two removable disks, the front one is the
built-in-memory disk, the other one is the Micro SD card disk. If there is no card plugged in, the
second disk cannot be opened. The device supports up to 32GB Micro SD card expansion.
Plug-in: face the front side (the side with prints) of the Micro SD card upwards (the direction in
which the machine's display screen faces) and connect it with the machine by plugging it with slight
force into the card slot of the machine. Now the machine can play the files stored on the card.
Plug-out: push Micro SD card inwards slightly, it will spring back and should be removable without
force.
9