Replacing The Oven Light; Grease Filter - Zanussi ZOB 181 User Information

Replacing The Oven Light

Disconnect the appliance
If the oven bulb needs replacing, it must comply
with the following specifications:
- Electric power: 15 W/25 W,
- Electric rate: 230 V (50 Hz),
- Resistant to temperatures of 300°C,
- Connection type: E14.
These bulbs are available from your local Service
Force Centre.
To replace the faulty bulb:
1. Ensure the oven is isolated from the electrical
supply.
2. Push in and turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace with the
new one.
4. Refit the glass cover and restore the electrical
supply.

Grease Filter

Before proceeding ensure the oven
is cool and is isolated from the
electricity supply.
When cooking meat, the grease filter must be fitted
over the oven fan by clipping it over the vents in
the back panel. This will prevent a built-up of fat
on the fan impellor. Do not use abrasive materials
to clean the seal. The grease filter is dishwasher
proof.
When cooking is completed and the oven has
cooled down, remove the filter by pushing the
protruding tongue on the filter upward (see figu-
re).
Wash the filter after use using warm soapy water.
Fit the grease filter only when roasting.
electrolux 21
21