Maxtor STM3320820A Owner's Manual page 23

• Idle mode power
Idle mode power is measured with the drive up to speed, with servo electronics active and with the heads in
a random track location.
• Standby mode
During Standby mode, the drive accepts commands, but the drive is not spinning, and the servo and read/
write electronics are in power-down mode.
Table 5: DC power requirements
Power dissipation (4-Disc values shown)
Spinup
Idle*
Idle with offline activity
Operating (40% r/w, 40% seek, 20% inop.)
Seeking (random, 20% idle)
Standby
Sleep
*During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels.
DiamondMax 21 PATA Product Manual, Rev. A
Average Average
(watts, 25° C) 5V typ amps
— —
9.30 0.611
10.40 0.719
13.00 0.772
12.60 0.613
0.80 0.106
0.80 0.106
Average
12V typ amps
2.80 (peak)
0.520
0.567
0.762
0.795
0.023
0.023
15