SENDO 330 User Manual page 32

10
Volume
Select this option to change the volume
setting for ringtones and alert sounds. Use
:
the and
decrease the volume level.
To enter/exit silent mode, you can press
#
then from the main screen. The silent
symbol, is displayed on the main screen
and external screen when the phone is in
silent mode.
ζ
Note: If the vibrate function is set to on,
the phone will still vibrate whilst in silent
mode.
ζ
Note: If the phone is switched off whilst
in silent mode, the phone will return to
the previous volume setting once
switched on again. This is provided as a
safety feature to help ensure no calls are
missed.
ζ
Tip: Press the
set to maximum, and an arrow will
appear. With this setting, ringtones are
played with a steadily increasing
volume.
Key Tones
This menu allows you to set the type of
keypad tones that you would like to hear
when pressing the keys:
Off
No sound emitted on a key press.
;
keys to increase and
:
key with the volume
On
Short, low volume tone.
DTMF
These are standard tones, as used in
touch tone phones. Each number has its
γ own specific tone.
On/Off melody
The phone can play a melody whenever you
switch it on or off. Select this to switch this
feature on or off.
Vibrator
Select this menu to set the vibrate function
for incoming calls and alert sounds:
Off
Deactivates the vibrate function.
On
Sets the phone to vibrate for an incoming
call or text message.
Vibrate then ring
Sets the phone to vibrate for a few
seconds before the phone starts to ring.
ζ
Note: This option is not available on all
models. None of the vibrate settings
affects any of the sounds settings.
30