Stopwatch Mode - Seiko 7T84 Instructions Manual

STOPWATCH MODE

u The stopwatch can measure up to 12 hours in 1/-second increments. When
the measurement reaches 12 hours, the stopwatch automatically stops.
u Measured time is indicated by the center hand and the two hands of the
small watch.
u Split time measurement is possible.
l How to reset the stopwatch
While the STOPWATCH hands are moving
1. Press button A to stop the stopwatch.
2. Press button B to reset the stopwatch.
While the STOPWATCH hands are stopped
[When the stopwatch is stopped]
1. Press button B to reset the stopwatch.
[When the split time measurement is displayed while the stopwatch is measuring.]
1. Press button B to release the split time display and return to the ongoing
measurement movement.
2. Press button A to stop the stopwatch
. Press button B to reset the stopwatch
[When the split time measurement is displayed and the stopwatch is stopped.]
1. Press button B to release the split time display.
2. Press button B to reset the stopwatch.
24
STOPWATCH OPERATION
<STANDARD MEASUREMENT>
A A B
START STOP RESET
<ACCUMULATED ELAPSED TIME MEASUREMENT>
A
A A A
START STOP RESTART
STOP
* Restart and stop can be repeated as many times as required by pressing
button A.
<SPLIT TIME MEASUREMENT>
B
A B A
SPLIT
START
SPLIT STOP
RELEACE
* Measurement and release of the split times can be repeated as many times
as required by pressing button B.
<MEASUREMENT OF TWO COMPETITORS>
A
B
B
A
2ND
FINISH TIME
FINISH TIME
START
COMPETITOR
OF 1ST
OF 2ND
FINISHES
COMPETITOR
COMPETITOR
B STOPWATCH 1/5-second hand
RESET
B
8
RESET
STOPWATCH hour hand
STOPWATCH minute hand
B
RESET
2