Seiko 7T84 Instructions Manual page 10

YACHT TIMER-STOPWATCH OPERATIONAL FLOW
<STANDARD MEASUREMENT FOLLOWING YACHT TIMER>
Yacht timer finishes counting down.
Stopwatch automatically starts.
<ACCUMULATED ELAPSED TIME MEASUREMENT FOLLOWING YACHT TIMER>
Yacht timer finishes counting down.
Stopwatch automatically starts.
*Restart and stop can be repeated as many times as required by pressing button A.
<SPLIT TIME MEASUREMENT FOLLOWING YACHT TIMER>
Yacht timer finishes counting down.
Stopwatch automatically starts.
*Measurement and release of the split times can be repeated as many times as
required by pressing button B.
<MEASUREMENT OF TWO COMPETING YACHTS>
Yacht timer finishes counting down.
Stopwatch automatically starts.
18
A B
STOP RESET
A A A
STOP RESTART
STOP
B B A
SPLIT
SPLIT STOP
RELEACE
A
B
B
2ND
FINISH TIME RESET
FINISH TIME
COMPETITOR
OF 1ST
OF 2ND
FINISHES
COMPETITOR
COMPETITOR
l Restart setting function
u Yacht timer mode features a restart setting function, which enables you
to restart the measurement correctly and easily after an interruption
during the stopwatch measurement. This function is particularly useful
when you have to restart after a premature start in a yacht race.
u The restart setting function can be used anytime while the stopwatch is
measuring following the yacht timer counting.
u Pressing button A for approximately 2 seconds will activate the restart
B
setting function.
RESET
u Restart of the measurement will be made at regular intervals from the
initial start of the measurement.
u The inter vals between the initial star t of the measurement and the
subsequent restarts are automatically decided according to the selected
B
yacht timer which had finished its counting before the stopwatch had
started.
RESET
B
1