How To Set The Time, Day And Date - Seiko 4R36 Instructions Manual

HOW TO SET THE TIME, DAY AND DATE

(FOR CAL. 4R36)
• Check that the watch is operating, and then set the time, day and date.
• The watch is provided with a day and date function and is so designed that the
day and date changes once every 24 hours. The date changes around 12 o'clock
midnight, and the day around 4:00 a.m. If AM/PM is not properly set, the date
will change around 12 o'clock noon, and the day around 4:00 p.m.
1. Pull out the crown to the first click. (The second hand
continues moving and the accuracy of the watch is
unimpaired.)
2. The day can be set by turning the crown clockwise.
. T he da te c an b e s e t by tur ning the c r ow n
counterclockwise. Turn it until the previous day's
date appears.
Ex.) If today is the 5th of the month, first set the date to "4" by turning the crown
counterclockwise.
CAUTION
• Do not set the date between :00 p.m. and 4:00 a.m. If you do, the date
may not change properly / it may cause a malfunction.
12
4. Pull out the crown to the second click when the second hand is at the 12 o'clock
position. (The second hand stops on the spot.)
Turn the crown to advance the hands until the date changes to the next. The
time is now set for the a.m. period. Advance the hands to set the correct time.
5. Push the crown back in to the normal position in accordance with a time
signal.
60
30
• The mechanism of mechanical watches is different from that of quartz
watches.
When setting the time, be sure to turn back the minute hand a little behind
the desired time and then advance it to the exact time.
60
30
CAUTION
1